A Quick Reference Guide for Carpet Cleaning

Health Home Improvement

Over the years, carpet cleaning has improved from merely using soap and water. There are several methods that can be used by professional carpet cleaning companies to clean carpets effectively. As the different techniques of cleaning differ, so do their results also differ. As a professional carpet cleaning company, we must be careful with the type of method we choose to go with.

To be on a safe side, it is better to study each of these methods and find out what makes them different. One method may be very effective for a particular type of carpet as regards to its fiber, and another method may not be the ideal choice. Studying each of these methods will help you chose which one works best for you. On that note, here are four carpet cleaning methods that one can choose.

  • Carpet shampooing method

Like the name implies, this method employs the use of shampoo. Note that the shampoo used is different from regular hair shampoo we know. This is a special type of shampoo for carpets.

How does it work?

A special solution known as the shampoo is applied using a machine or by hands to the carpet to be cleaned. It is then worked into the carpet so that the solution will be evenly distributed to all parts of the carpet. A rotating bristle brush or an air compressor is used to get the solution into the carpet. The use of these materials to get the solution into the carpet is to agitate or stir up the dirt in the carpet. Afterwards, the carpet is left to soak up the shampoo for a while, letting it take effect before it is then vacuumed.

Results and effects

In plain terms, this is not a very good method of carpet cleaning because it only removes dirt on the surface of the carpet. Also, most machines used in this method do not attain the required temperature to remove stains effectively. Finally, in the process of getting the shampoo into the carpet, the rotating brush can damage the fibers of the carpet.

  • Dry carpet cleaning method

Also like its title says, this method of carpet does not use water. In fact, very little or no moisture is used. The entire process involves the use of chemicals.

How does it work

High grade cleaning agents of professional standard and solvents in powdered form are mixed together and spread over the carpet. The powder is also worked into the carpet using a machine and left to sit for a while. Afterwards, it is vacuumed off again.

Results and effects

The unmistakable benefit of this method is that it does not require any drying time. The whole process is carried without any liquid; hence you do not have to worry about your carpet drying quickly. However, it is mostly used for surface cleaning and can be completed in a short time.

  • Hot water extraction carpet cleaning method

In this method, a special machine is used to deep clean a carpet using a mixture of hot water and detergent.

How does it work?

A machine with a hose or a portable appliance is used to apply a mixture of detergent and hot water into the carpet. After sometime, following when the carpet must have soaked up the solution, it is then vacuumed using the same machine’s vacuuming mechanism.

Results and effects

This method is known for highly effective deep cleaning of the carpet fibers, although the results may vary in different carpet fibers. For this to work, the temperature must be high enough as lower temperatures may not work effectively. Sadly, the drying time for this method can be quite long.

  • Steam carpet cleaning method

This method is similar to the hot water extraction method. The difference is that this method uses steam instead of hot water. The hot steam is a powerful way of extracting impurities and dirt from deep beneath the carpet fibers.

How it works

Much like the hot water extraction method, a specialized machine delivers hot steam mixed with detergent to the carpet fibers. The steam is created as a result of the temperature being up to 110 degrees centigrade. The carpet is then vacuumed afterwards

Results and effects

This is perhaps the most powerful and most penetrating carpet cleaning method ever used. The combination of steam and effective detergents removes dirt buried deep in the carpet fibers. Also, due to the fact that it is more steam than water, drying time is equally reduced.

It is important to find the appropriate cleaning method that works best for you and is more appropriate for the type of carpet and its fiber. You can get the best carpet cleaning in London today without breaking a sweat.